![]( "Vends Sono Bose L1 - 1 300 €")
A vendre Sono Bose L1, avec un caisson de basses.
Sacs pour pied et enceintes colonne fournis.
Jamais eu un seul soucis avec.
Achetée en 2006.
Caractéristiques :
System Performance
System Type Self powered, two-way
Frequency Response (+/-3 dB) 1 40 Hz - 12 kHz
Frequency Range (-10 dB) 1 32 Hz - 14 kHz
Nominal Dispersion 160° H x 0° V
Maximum SPL @ 1 m 2 115 dB SPL (121 dB SPL peak)
Crossover Frequency 200 Hz (24 dB / octave)
Amplification
System Power Rating 500 W
Low-Frequency Amplifier 250 W
High-Frequency Amplifier 250 W
Distortion at Rated Power 0.1 % Max (30 Hz - 15 kHz)
System Limiter Dynamic limiter
Overload Protection AC power fuse - T15AH / 250 V
Power Indicator Green LED: system on, Red LED: fault
Transducers
Driver Compliment Cylindrical Radiator® loudspeakers: Twenty-four (24) 2.25" (57 mm) HF drivers
B1 bass module: Two (2) 5.25" (133 mm) LF drivers (8 Ω)
Channel
Signal Indicators
Channel 1 & Channel 2
Signal/clip LED: Green= signal present, Red=clip Signal/clip LED: Green= signal present, Red=clip
ToneMatch Presets Selectable setting from 00 to 99
Trim 42 dB of range
Input Balanced XLR / 1/4" TRS combo jack with XLR loop through
Insert TRS line input
Channel Gain (1/4" input) -Infinity to +28 dB
Channel Gain (XLR input) -Infinity to +48 dB
Maximum Input Signal +10 dBV (Mic) +18 dBV (Line)
Input Impedance 2.2 kΩ (Balanced) 909 kΩ (unbalanced)
Phantom Power Switch +24 VDC
Line Out Balanced XLR
Line In
Channel 3 & Channel 4
Unbalanced 1/4" TS jack Unbalanced 1/4" TS jack
Level Controls
20 dB available gain (+2.6 dB at 12:00) 20 dB available gain (+2.6 dB at 12:00)
Additional Connections
Bass Module out (for B1 only) NL4 connector (all pins wired, two for audio, two for auto sensing). Bass output signal for driving one or two B1 bass modules. (1 B1 bass module = 8 Ω) (2 B1 bass modules = 4 Ω)
Bass Line Output Post-DSP bass signal output. Accepts a 1/4" TRS cable. Supplies low frequency signal for connecting a PackLite® power amplifier or powered sub woofer.
Data In Digital input for software update only
Data Out S/PDIF digital output @ 44.1 kHz (CH1 + CH2 Sum)
Remote 7-pin din connector for RC1
AC Mains IEC connector
Remote
Controls (available on the R1 Remote) Master volume
Channel volume (CH1 + CH2)
Treble: +/- 10 dB high-pass filter @ 10 kHz (CH1 + CH2)
Mid: +/- 10 dB band-pass filter @ 1 kHz (CH1 + CH2)
Bass: +/- 10 dB low-pass filter @ 40 Hz (CH1 + CH2)
Physical
Enclosure Power Stand: Polypropylene
Cylindrical Radiator: Aluminum enclosuure with ABS baffle
Grille Powder-coated perforated steel
Dimensions Assembled height: 81.6" (2074 mm)
Net Weight Power Stand: 36.5 lb (16.7 kg)
Cylindrical Radiators (pair): 33.9 lb (14.8 kg)
B1 bass module: 26.6 lb (12.1 kg)
Shipping Weight Power Stand: 56 lb (25.4 kg)
Cylindrical Radiators (pair): 43 lb (19.5 kg)
B1 bass module: 30 lb (13.6 kg)
